Tag Archives: black

Guitar tone: have you been missing the obvious trick?

Still looking for a better guitar tone? You might have been missing something obvious for some time. You have the guitar, the amp, the overdrive pedals, EQ, but that sound isn’t quite there? It just doesn’t feel right. The obvious answer is to do less. More specifically…

Dial down the gain. Clean up your sound.

Sound ridiculous? Stay with me for now and I’ll try to explain why I believe a cleaner sound makes for not only a better guitar tone, but also helps your sound cut through the mix of a full band. A few things to consider…

Here comes the science (sort of)

Adding overdrive or distortion to your guitar smooths out the tone. Yes, it can sound lovely and ‘syrupy’, not unlike Clapton’s famous ‘woman tone’ or the thick lead sounds of Gary Moor or Slash, but have you ever noticed how your solo cans till get lost in the live mix? This is particularly true if your band includes keys, a second guitar player or a horn section, as all of these instruments predominantly occupy the midrange of the frequency spectrum. In effect, your smooth tone is competing with many different voices, and all that lovely smoothing-out (which sounds so cool for your legato runs, etc) makes your sound more likely to dissolve into the wider sound of your band.

The trick is volume over distortion

Try listening to pretty much any classic rock record from the late sixties and seventies (the age of the ‘guitar hero’). Notice how so many of those riffs are only slightly overdriven, at best? Some, such as Lynyrd Skynyrd’s ‘Sweet Home Alabama’, make use of guitar sounds which are virtually clean. That classic sound you hear is usually a small amp (say 30 watts) being turned up full, and breaking up into a light overdrive sound. This applies to most of the back catalogues for most of your favourite ‘heavy’ bands, from Led Zeppelin and The Who to early Aerosmith and even Black Sabbath.

My favourite example to highlight this is the classic song, Smoke On The Water by Deep Purple. The link takes you to the studio recording. Compare this with every covers band that had played this song. Ever. Heck, compare it with how Deep Purple play it now! Everyone has a different opinion, but wouldn’t most agree that the original sounds better?

These bands sounded heavy because they were playing the loudest amplifiers available, and as they got bigger, the sound got heavier, but we’re still a long way from the Mesa Boogie levels of heaviness the eighties would bring along…

Wouldn’t these bands have played heavier, if they had been able to?

Quite probably. They were considered pretty noisy for their time! If those full, thick distortion sounds had been more readily available in the mid-sixties, would the sound of rock guitar have been very different? The truth is, we’ll never know. Those artists used the equipment they had available, and we can only hypothesize as to alternative outcomes. Here it becomes a little too ‘chicken-and-egg’ for my liking, though there are numerous threads on guitar forums across the internet if this is the kind of debate you’re looking to investigate further.

Of course, one counter-argument would be the fuzz pedal. This was heavily used by some artists, notably Hendrix (if you’re not sure how that fuzz sounds, think of the opening riff to ‘Satisfaction’ by the Rolling Stones as your starting point). This effect created a thick and – it goes almost without saying – ‘fuzzy’ sound to the guitar’s tone, making solos sustain for longer and creating a warm, distorted sound. However, the fuzz pedal didn’t take over the sound of rock  guitar as we know it. Perhaps distortion wasn’t the end-goal for guitar players back in the sixties, after all?

So should I play clean but loud for the rest of my guitar-playing career?

Probably not a good idea. Your band mates will most likely not appreciate it!

However, I might suggest you start by dialing back the gain a little on your drive channels, pedals, etc, and make better use of volume and tone controls (on the guitar, amp and any stompboxes you are using) to allow the sound of your guitar to ring through.

But what about sustain?

It’s not always possible to turn up loud and play away. I currently gig with a digital amp which is DI’d into my band’s mixing desk, with no output from the amp itself. My main channels are a clean and a slightly overdriven channel, both of which are fairly ‘dry’ signals (not effects except for a very small amount of reverb). My lead sound (for solos) is another version of the overdriven sound, with a slight boost in volume and treble frequencies. Crucially, this sound also includes a fair bit more reverb dialed in, plus a short delay mixed low underneath the original signal. The reverb and delay both act to thicken up the sound, and assist my guitar sound not only through increased sustain, but in helping the sound to cut through the mix.

Another trick to use in the studio is to use two amps when recording; one with an overdriven sound, and another set to an almost clean tone. The cleaner of the two amps can be mixed quite low, but it’s presence will add some clarity of definition which the heavier sound loses. The whole thing makes for a guitar tone which is not only more thick, but more true to the sound of your guitar – try it!

Take away points:

  • Clean up your tone – wind back that gain!
  • Use effects to create the impression of more volume (such as reverb and delay) instead of piling on the distortion

Caveats:

I fully appreciate that everyone’s opinion is bound to differ on subjects as personal as guitar tone. What works for me may not necessarily work for you. It is also worth remembering that certain styles of guitar-based music rely on a super-distorted sound as an integral element to their sound (think of bands like Nirvana and Skunk Anansie, for instance). However, don’t be afraid to try experimenting with a cleaner tone. Be warned though, with a clean sound, there is nowhere to hide any weaknesses in your playing technique!

 

Advertisements

Video: Funk & Soul Medley (with Switch)

Been a while since my last post (several life-changing events recently – all positive!) but thought I’d post a new video from Switch.

For those new to my blog, Switch are my main function band at the moment. I’ve been their guitar player since the beginning of 2015, and we’ve performed at all manner of function & event in that time.

This medley was recorded last winter, but only recently uploaded by the band. It features three funk & soul songs, all of which are staples of the wedding/function band scene:

  • Signed, Sealed, Delivered (Stevie Wonder)
  • Never Too Much (Luther Vandross)
  • Ain’t Nobody (Chaka Khan)

This medley showcases Switch’s full six-piece lineup of female vocals, bass, drums, keys, guitars & male backing vox (me), plus alto sax & female backing vox.

For my part in this recording, the guitar used was my Fender Modern Player Stratocaster (short scale model), DI’d direct into the studio desk. Recording took place at Nemix Studios in Newcastle upon Tyne, England. I must admit that I don’t know which ‘re-amp’ patches were used for my guitar tones, other than I requested a Fender Blackface/Deluxe style amp for the clean sound. Sorry there isn’t any more detail….

As always, let me know what you think. In case the video above does not play, you can access it on YouTube here.

Enjoy! xx

A song for Black Friday: Mercy (cover)

Is it Black Friday? Have mercy…

Tenuous enough of s link for you? Good.

Earlier this year I hit the studio with function band Switch, and this cover of ‘Mercy’ (made famous by Duffy) was one of the tracks we recorded.

The guitar I used was the same one you can see in the video: Fender Modern Player Stratocaster going through one of the in-house Marshall combos at the Loft Studios.

Thanks to Loft Studios, Newcastle upon Tyne, for the recording session & production. Also many thanks to Nemix studios (also Newcastle), which was our location for the video, and to Artifact Media for the film production!

Enjoy!